SDR-2000 DIGITAL SYSTEM SPECIFICATIONS
Sample Rate: 44.1 KHz, and 48 KHz
D/A Conversion: Four custom 20 bit DACs
in balanced configuration
Digital Filter: 8x oversampling, 24 bit math,
32 bit accumulator
Analog Filter: Linear phase to 22 KHz
Frequency Response: DC to 22 KHz ñ.3 dB (limited by encoding)
DAC Step Resolution: 5 uV or less
Digital Noise Output: 100uV peak to peak or less
Transient Overshoot: 8% or less
Transient Settling Time: 100 uS or less @ 1%
Intrinsic Jitter: 8 Picoseconds RMS
20-25 picoseconds peak
attenuation corner frequency @ 100 Hz

 

SDR-2000 ANALOG SYSTEM SPECIFICATIONS
Outputs: RCA and Balanced XLR
Output Impedance: 100 Ohms
Frequency Response: DC to 1.2 MHz -3 dB
Harmonic Distortion: Less than .002%
Intermodulation (SMPTE): Less than .003%
Nominal Output: .75 Volt rms
Output Voltage Swing: 2.5 Volts rms
Signal to Noise Ratio: Greater than 120 dB
Channel Separation: Better than 125 dB
Slew Rate: 600 V/us

 

SDR-2000 / DPS-2000 POWER REQUIREMENT
Voltage: Factory set 100, 120, 220, 240 VAC
@ 47.5 Hz to 440 Hz
Continuous Dissipation: 65 Watts

 

SDR-2000 MECHANICAL SPECIFICATIONS
Dimensions: 48 cm (19") W, 10.5 cm (4.25") H, 40 cm (16") D
Weight: 14.1 kg (31 lbs) net.

 

DPS-2000 MECHANICAL SPECIFICATIONS
Dimensions: 15 cm (6") W, 9 cm (3.5") H, 32.5 cm (13") D
Weight: 5.7 kg (12.5 lbs) net.
Shipping: 23.6 kg (52 lbs) net.


All files are copyright 2008 by Spectral Audio, Inc.